This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
Double Cylinder Hydraulic Thermoplastic Paint Hot Melt Kettle
Good quality hydraulic double-cylinder hot melt kettle is used for road marking
Hydraulic hot melt kettle / paint preheater / thermoplastic boiler
Double cylinder hydraulic thermoplastic paint hot melt kettle
Product Description
The 800/1200 hydraulic double-cylinder hot melt kettle is one of the main equipment for hot melt marking construction. The equipment adopts multi-channel integrated hydraulic transmission steplessly variable speed and powerful torque. It has large load operation, forward and reverse mixing, and uniform mixing. ; Direct-injection combustion stove is adopted, which has the characteristics of high combustion efficiency, long continuous working time, simple operation and convenient maintenance. It ensures convenient and economical use of fuel in some areas, improves combustion efficiency, enhances the speed of dissolving materials, and reduces construction costs.
Product Parameters
800 hydraulic double-cylinder hot melt kettle parameters
Engine: 15PS electric start evaporative water-cooled diesel engine
Hydraulic drive mode: The diesel engine drives the mixing shaft to work through gear pumps, multi-channel hydraulic valves, overflow valves and hydraulic motors.
Hydraulic oil tank: The oil tank has a capacity of 70L and is equipped with 68# hydraulic oil.
Heating system: The liquefied petroleum gas tank is highly efficient and economical through the valve, and the gas is supplied by spraying the stove, which makes the liquefied gas burn more fully and more economically. The heating temperature can be adjusted freely within the range of 0-300°.
Molten material cylinder: The boiler cylinder has sufficient strength and reasonable strength and toughness to make it have a significant heat transfer effect
Thermometer: heat-conducting oil-sensing heat-resistance and anti-vibration thermometer, temperature sensing is more accurate.
Operation mode: manual multi-channel control valve controls the two-cylinder agitator to do positive and negative mixing.
Shape structure: high-strength, high-temperature-resistant, and oxidation-resistant double-layer stainless steel steel structure design, and the pedal is a non-slip pedal.
Safety device: The multi-channel control valve has a special unloading device to prevent misoperation.
Size and weight: 1600*1430*1520mm
Weight:850kg
Model
1200 hydraulic double cylinder hot melt kettle
Engine:
15HP electric strat water-cooled diesel engine
Stirring system:
Hydraulic stirring system with protective device, can stir clockwise or anti-clockwise.
hydraulic motor Flow Rate:
5.0L/min
Paint tank capacity:
600KG×2
Paint tank:
Made of boiler iron(LXD1200B: Made of special stainless steel )
Heating mode:
LPG(gas tank suggest 50KG) ,Direct injection energy-efficient burner
Hydraulic oil tank:
70L
Thermometer:
Each container is equipped with thermometer with heating resistance and shock resistance.
Operation Control:
The manual dual control valves respectively control two stirrers in the two cylinders.
Heat preservation:
Double layer heat insulating material is fixed between inner container and outer layer
Ventilating exhaust system:
Suction-type chimneys at the top of cylinder
Discharge Outlet:
Lockable discharge trough and the close inter meshing type discharge system.
Structure:
Frame structure,Integrative welded structure with high stength,heating resistance and oxidation resistance.